[83GMCK2500]

Originally Posted by rgunlock

I was re-watching that video I linked earlier and he basically said the opposite on which way the rounded edges go. Your document says rounded edges toward the cam ring, which the picture shows as the large hollow ring that the shaft goes into which would mean rounded edges out.

Edit: Looks like you mean that the photo is intended to show how yours was originally done the wrong way.

My document was from the rebuild kit I bought and, yes, my pic is of my pump that had eaten itself. The inside of the cam ring was quite grooved on that unit when I took it apart and I suspicioned it was from improperly installed vanes.