The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MARTINSR · 11-03-2017, 12:45 PM

I don't have the number for you, but it isn't much. Here is a cart I made with a chunk of an old frame and wheels from Harbor Freight. I use the trailer dolly from Harbor Freight to roll it around. I ended up welding the jack stands to the cart. DAMN I am glad I did this. I would have never done it if I hadn't seen so many guys on this forum with carts, it makes things sooo much easier.

I was lucky to have a junk frame available to cut up. That gave me JUST what I needed, it's bolted down on the factory mounts keeping it all straight as I cut and weld it up. It will now bolt right on the stock frame without an issue.

Brian

11-03-2017, 12:45 PM	#2
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: AD cab weight I don't have the number for you, but it isn't much. Here is a cart I made with a chunk of an old frame and wheels from Harbor Freight. I use the trailer dolly from Harbor Freight to roll it around. I ended up welding the jack stands to the cart. DAMN I am glad I did this. I would have never done it if I hadn't seen so many guys on this forum with carts, it makes things sooo much easier. I was lucky to have a junk frame available to cut up. That gave me JUST what I needed, it's bolted down on the factory mounts keeping it all straight as I cut and weld it up. It will now bolt right on the stock frame without an issue. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"