|
Re: My 78 K15 High Sierra build - Fish Tremble
Quote:
Originally Posted by 7dee2
One pump after the selector as low and far back as possible, electric pumps push better than pull is thought behind the placement. This is a good one for your application https://www.summitracing.com/parts/CRT-P4594, here is the same one installed on Blue http://67-72chevytrucks.com/vboard/s...645614&page=42 it's installed using a key on circuit with a manual rocker switch in the cab so when not needed it's not running. Doesn't require a pressure regulator and can be your primary pump if you decide to remove the mechanical pump all together. Blue runs a filter before the electric pump, after the mechanical pump and one in the carb!!  |
Thanks so much Brett! Sometimes it is just so nice that someone will spell it out and take out the guesswork.
__________________
Rick
78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel
71 GMC C25 350/TH400 - Project Angie
59 Chevy SWB Stepside (next in line? Not sure now  )
2001 GMC Sierra K2500
|