Quote:
Originally Posted by 71CHEVYSHORTBED402
Very cool. You made it look easy. We're removing the front suspension this weekend. I was going to cut, but may drill instead.
|
My only recommendation is a sharp set of drill bits. Start small and work your way up. I used a 1/2” bit to take most of the head of the rivet down and then chiseled what remaining head was left. You can do the same on the other side of the rivet to remove it completely. Every so often, I had s rivet that I could push out with a pinch and a hammer, but most had to be drilled on the opposite side as well.