Re: S10 Swap how to
I just ordered a set of 20" Ridler 695's with a machined lip for my 54 that's on an S-10 frame. The specs are below.
Fronts:
695 - 2861g
20 x 8.5 (4.75 backspace)
Rears:
695 - 2161g
20 x 10 (5.5 backspace)
I have a 4wd blazer axle on the back and I wanted to check with anyone who has used this setup to see what kind of spacers will be needed if any (front and back). I have seen a few that have 2" spacers on the rear axle but it has been on 2wd axles. any info will be appreciated!
Thanks
|