Quote:
Originally Posted by Ben_Yeaton
Found this thread digging around for the same info. Are you sure that the sleeve available for the Jeep guys/ Dana 30/ etc are in fact incorrect for our tie rod ends? I'm thinking this would be a very smart piece to produce, especially since I need them as well. Hopefully someone chimes in!
|
It is not the correct taper, I confirmed that. I had a friend make me one from a grade 8 3/4-16 Bolt that was an inch long, with no head, and tapped the spindle to suit. I do not have professional alignment tools, but with rudimentary measuring it looks as if bump steer is eliminated with the stock tie rod under the spindle.
Posted via Mobile Device