The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

nvrdone · 02-13-2018, 10:36 AM

do you have a booster or just the m/c? either way the push rod should go into the booster or m/c about 1" and seat on the diaphragm or m/c piston. i'd disconnect the push rod from the pedal & push it all the way in until it wont go any further. then you can see if the push rod is too short. good luck.

02-13-2018, 10:36 AM	#2
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,436	Re: Brake problems do you have a booster or just the m/c? either way the push rod should go into the booster or m/c about 1" and seat on the diaphragm or m/c piston. i'd disconnect the push rod from the pedal & push it all the way in until it wont go any further. then you can see if the push rod is too short. good luck.