Quote:
Originally Posted by BLP86
Wanta
Your C 10 looks like a very nice truck, I concur with your taste in trucks.
Can you share some particulars on the lowering of the 2017. What products did you use and how did you get to 5 and 7in. Most products I have seen give 4 and 6 so just wondering what you used. The 2017 sits awesome in my humble opinion.
Thanks for any info you may provide.
Bruce
|
The rear is just a belltech flip kit and no c notch to get it to 7, she is close to the frame but I never hit it.
The front was a little harder, originally I did belltech spindle (2"), belltech drop shocks (2") and control arm bushings to get to 4". 4" was not enough as I like some rake to the front. So I purchased some belltech 2" drop springs and then put in two rings back on the shocks to gain one more inch drop getting it to 5" total. Then for alignment reasons I purchased just upper control arms from Inez hot rods.
If i had to do it all over again I would just go with the full Inez kit.
Thanks for the compliments.