The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Steel Fuel Line from Pump to Carb (SBC 350)

Jaysonb · 02-23-2018, 06:36 PM

You will use 3/8 hard line, and 5/8-18 tube nuts. I would recommend that you also install a fuel pressure regulator, as edelbrock carbs can be pretty sensitive to fuel pressure.

02-23-2018, 06:36 PM	#7
Jaysonb Registered User Join Date: May 2009 Location: Good Thunder Mn. Posts: 955	Re: Steel Fuel Line from Pump to Carb (SBC 350) You will use 3/8 hard line, and 5/8-18 tube nuts. I would recommend that you also install a fuel pressure regulator, as edelbrock carbs can be pretty sensitive to fuel pressure. __________________ 77 k10 winter beater build http://67-72chevytrucks.com/vboard/s...d.php?t=716884 85 GMC short fleet budget build http://67-72chevytrucks.com/vboard/s...d.php?t=714222 80 C10 stepside build http://67-72chevytrucks.com/vboard/s...d.php?t=693848