The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1957 front fender / rocker not lining up?

_Ogre · 03-14-2018, 01:13 PM

still waiting on a pic of the offending problem
the rocker trim on the bottom of the step is easily bent if the truck ever got bottomed out on the rocker
2 post lifts are rough on the rockers if you don't pay attention when putting a truck on the lift
when i replaced both steps and rockers way back when, we had to bend the rocker out to line up better than it did
it takes 4 strong hands to do this

03-14-2018, 01:13 PM	#8
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,677	Re: 1957 front fender / rocker not lining up? still waiting on a pic of the offending problem the rocker trim on the bottom of the step is easily bent if the truck ever got bottomed out on the rocker 2 post lifts are rough on the rockers if you don't pay attention when putting a truck on the lift when i replaced both steps and rockers way back when, we had to bend the rocker out to line up better than it did it takes 4 strong hands to do this __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer