[Root2812]

I'm mostly familiar with Gen 3 and 4 engines and not Gen 5 and I don't think you'll find a factory accessory drive that fits your truck without any mods. The truck accessories put the AC low where it hits the frame, the f-body and gto accessories have the alternator low on the drivers side and it hits the frame, the corvette accessories will have an alternator that hits the inner fender unless you recess your firewall and move the engine back.

What you could do is go with the truck power steering and alternator bracket and then swap the ac bracket for something like Holley where the alternator is up high on the passenger side. That combo would get you close but you still might have some inner fender clearance issues for the power steering pulley and the AC lines.

I have a 1950 so its very similar and that was what I found. I ended up going with the Holley accessory drive on corvette spacing for the alternator and PS and I don't have AC.