|
Re: How to run braided line along a hard line
davepl, that one from McMaster carr is the same size on both lines. Those will work but steel edges on hose, may be an issue down the road. As Steve Cole pointed out, I would suggest using 2 of the individual parts at the diameters of choice. If you want to use the double clamp, I suggest going larger and then getting a grommet so the clamp is not on the metal. The Stauff clamps that Killer Bee pointed out are nice, but not cheap. If you go that route get the one for the smaller tube and drill the other side out for the hose. Although best option is to run hard lines until you need flexible lines.
|