The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Wrenchbender Ret** · 06-05-2018, 03:39 PM

If you have a cover over the bottom of the housing, prop the clutch pedal down & see if the pressure plate moves back enough to leave a gap between the lining & the plate & flywheel. You may just have a drag on the pilot bushing that will clear out when you get it started.
You can't put a preload on the clutch. You will destroy the TO brg &/or the main brg in the engine.
George

06-05-2018, 03:39 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,193	Re: LQ4 w/ LS Luk Clutch, wont disengage If you have a cover over the bottom of the housing, prop the clutch pedal down & see if the pressure plate moves back enough to leave a gap between the lining & the plate & flywheel. You may just have a drag on the pilot bushing that will clear out when you get it started. You can't put a preload on the clutch. You will destroy the TO brg &/or the main brg in the engine. George