The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

NeverDone50 · 06-12-2018, 08:36 PM

The motor ran with the old carb, but it never ran right so I decided to buy a new monojet. It did run with the new carb at first, but after some initial tuning, it wouldn't start at all. All the electrical parts have been checked and I've narrowed it back to the carb. The mounting gasket may be wrong. Also, the monojet instruction manual doesn't list adjustments for '67 c20. It only goes back to '68. Also I think my float level is wrong. It's suppose to be 9/32 and I have it set to 1/4.

06-12-2018, 08:36 PM	#6
NeverDone50 Registered User Join Date: Aug 2014 Location: Overland Park, Kansas Posts: 30	Re: More carb problems! The motor ran with the old carb, but it never ran right so I decided to buy a new monojet. It did run with the new carb at first, but after some initial tuning, it wouldn't start at all. All the electrical parts have been checked and I've narrowed it back to the carb. The mounting gasket may be wrong. Also, the monojet instruction manual doesn't list adjustments for '67 c20. It only goes back to '68. Also I think my float level is wrong. It's suppose to be 9/32 and I have it set to 1/4.