|
hi walli
first off you have to take off every single piece of plastic door part---the overlay modeling is what i am talking about....no you do not have to cut a hole--even though it may look that way....then you'll find- 2 vertical size holes about 11 inches in lenghth and 4 inches deep to change out the motor...if you use the window alot or have bad trim it's the motor,,,but you can get the switch check at most anywere...chevy dealer-shucks-napa--will all do it for you....
then it's alot of knuckel scraping to take it out and put it in----but when you take it out make sure you take out the regulator-with it--or you'll never get it apart by itself...and get a manual to help everything go back the rite way---that is if your at all like me and need the help....
best off luck--it gets easier as you go-on the second one,,,the first ones allways a bear...
aabear
john
|