|
Re: '50 chevy 3100
Started my driver side lower cowl patch fix. Ran out of wire had to go get more and hopefully I'll get it done in the morning.
Since I ran out of wire I decided to go after some spots on the body with the wire wheel. The PO really loved bondo, tiny little ding meant several inches of bondo feathered out all around it. So you can imagine a bad spot... I need to replace the cab corners. I attacked the driver side and it's rough, and it was reshaped with a lot of bondo. I haven't looked at the passenger side yet.
I also had a piece of metal inside the cab, it wasn't tacked on good and I was able to pull it up. It made a crack in the outside paint. So I went after that spot with the wire wheel and found a nice round hole.
|