[Rabid Anti-Dentite]

Originally Posted by robertsjm711

16 x 8 with 5" backspacing/+13mm offset (https://www.summitracing.com/parts/brw-997683450)
S10 frame, stock spindles with 2.5" spacers in front
Homemade body mounts
Mid 60's 12 bolt passenger rear stock width
Venezia Crusade SXT 225/60 R16

https://www.youtube.com/watch?v=61BLek1f5Fk

So question on the backspacing...a lot of the wheels I see are 4.5" backspaced, with the S10 swappers running the 2" spacers. Did you have to run the 2.5" spacers due to the 5" backspace? I have been looking at some wheels with a 6" backspace (20" Dodge Ram Spare Wheels), but I can find anything greater than a 1.5" spacer with the bolt pattern I would need.