The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Knomadd '71 SWB C-10

knomadd · 07-26-2018, 08:46 PM

Keith, Can you verify some dimensions for me? The distortion in the picture makes it a bit hard to tell what the dimensions are. I think I've got it, but I want to be sure.

It looks like the stud on the H is 13/16 from the left edge of the C. The stud on the 10 appears to be 11/16 from the right edge of the emblem. Both studs look like they are 11/16 from the bottom edge of the emblem. If that's correct, I think I can get it right on with the measurements from the link you provided. The engineer in me want's it to be EXACT, but I think it'll likely be within about 1/8" in any direction.

07-26-2018, 08:46 PM	#1013
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Knomadd '71 SWB C-10 Keith, Can you verify some dimensions for me? The distortion in the picture makes it a bit hard to tell what the dimensions are. I think I've got it, but I want to be sure. It looks like the stud on the H is 13/16 from the left edge of the C. The stud on the 10 appears to be 11/16 from the right edge of the emblem. Both studs look like they are 11/16 from the bottom edge of the emblem. If that's correct, I think I can get it right on with the measurements from the link you provided. The engineer in me want's it to be EXACT, but I think it'll likely be within about 1/8" in any direction. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)