Re: 84 C20 Upper Control Arm question
Quote:
Originally Posted by Handsome65
Hey guys,
I'm rebuilding the front suspension on my 84 C20, and I am slightly stumped by the upper control arm. On each end of the pivot bar that connects the upper control arm to the frame, there is a cap / nut with a grease zerk on the end, and I cannot figure out how to remove it. It is very large, looks like it would require a 1 1/2" socket to remove. What's the trick to getting this thing off?
Thanks in advance for your thoughts!
|
As you indicated, a large socket would work. You can also use a large crescent or pipe wrench to unthread them.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|