[Ol Blue K20]

Originally Posted by Quikshft

Yikes, one more detail to describe. To vent the tank there is a tube on the fuel pickup. I ran a line from there and tee'd into the loop of line that goes up into the passenger side cab corner. (a high loop which proceeds from the stock tank, basically just a way to keep liquid fuel out of the vent line running to the charcoal canister under the hood) I just brazed a piece of fuel line into the existing 'high loop' and ran it solid down to a point through the cab floor, then used a short piece of rubber fuel line to connect to another hard line mounted inside the passenger frame rail, running parallel to the fuel line to the rear of the truck where again I ran some rubber hose to make the connections on top of the tank. I didn't really want to vent the tank to the atmosphere so the stock charcoal canister is going to do double duty now.

Hope this all is clear. Praise the Lord and pass the fuel filler nozzle!

Thanks for taking the time to give all that great info . You did a nice clean installation. Thanks again!!