The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

frankslagoon · 09-20-2018, 11:58 AM

Update. Soo, I adjusted my cable and fired him up. 800 rpm. the pressure is around 75 psi. bring it up and I get 150. more in reverse. shifts through the gears at about 1900 rpm. That's pretty good. I'm gona stop here and get a couple things straighted out. My carb is a 750 and that's to big, I'm gona put a 600 on. before I do I'm gone bolt the new tv lever that's coming in the mail. and the drive line I cut down is vibrating.I'll get that fixed this week also. Then test drive, That stuff never held me back when I was 20 ? thanks guys. I'll probably put the transgo kit in. but after I get it everything working.

09-20-2018, 11:58 AM	#39
frankslagoon Registered User Join Date: Jan 2014 Location: Wasilla Alaska Posts: 537	Re: 700r4 tv valve assembly problem Update. Soo, I adjusted my cable and fired him up. 800 rpm. the pressure is around 75 psi. bring it up and I get 150. more in reverse. shifts through the gears at about 1900 rpm. That's pretty good. I'm gona stop here and get a couple things straighted out. My carb is a 750 and that's to big, I'm gona put a 600 on. before I do I'm gone bolt the new tv lever that's coming in the mail. and the drive line I cut down is vibrating.I'll get that fixed this week also. Then test drive, That stuff never held me back when I was 20 ? thanks guys. I'll probably put the transgo kit in. but after I get it everything working.