The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - C20 Removing Springs from Rear Trailing Arms

**aotte1** · 09-20-2018, 10:31 PM

More photos
1,2, and 3). Photos of the trailing arm front bushing removed with the air hammer chisel. It is removed easily, the air hammer vibrates it out. The lip shown in photo 3 is the area concentrated on.

4 and 5). Photos show the air hammer and chisel used.

Note: The air Hammer May take a couple of minutes to vibrate it out, and maybe learning curve on how much pressure to use applying the tool.

09-20-2018, 10:31 PM	#3
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: C20 Removing Springs from Rear Trailing Arms More photos 1,2, and 3). Photos of the trailing arm front bushing removed with the air hammer chisel. It is removed easily, the air hammer vibrates it out. The lip shown in photo 3 is the area concentrated on. 4 and 5). Photos show the air hammer and chisel used. Note: The air Hammer May take a couple of minutes to vibrate it out, and maybe learning curve on how much pressure to use applying the tool. Attached Images Last edited by aotte1; 09-20-2018 at 11:41 PM.