Quote:
Originally Posted by cwii
Thanks for the answers. Longhornss I wasn't aware the bim module was available. Looks like the easiest solution
|
Yes for sure if you are running a GM Computer this is defiantly the way to go. I should clarify that the BIM is only compatible with the VFD3 rev. G, VHX and HDX control box instrument systems only. Earlier control boxes (with an aluminum case) are not compatible with the BIM family of Expansion Modules.
Depending on how the Speed sensor on the TR6060 and oil pressure sensor is wired those are the two connections you may have to hard wire into the Dakota Digital Cluster.