The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Boog** · 10-20-2018, 07:43 AM

As far as the angle of the rear plug wire stands goes (toward the firewall or away from the firewall) that may be determined by what vehicle the engine is in . In a car the rear of the engine can be closer to the firewall than in a truck allowing less wire routing room. Or maybe in a 2wd or 4wd truck where the engine placement is close or not to the firewall.

10-20-2018, 07:43 AM	#19
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,014	Re: OEM Plug wire stands/supports As far as the angle of the rear plug wire stands goes (toward the firewall or away from the firewall) that may be determined by what vehicle the engine is in . In a car the rear of the engine can be closer to the firewall than in a truck allowing less wire routing room. Or maybe in a 2wd or 4wd truck where the engine placement is close or not to the firewall. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross