Re: 57 Panel "FAKMLC" build
here is a pic of my LS truck mock up engine in the frame with the stock truck exh manifolds and then later with the real LS engine and the camaro exh manifolds. lots of room on each side with the camaro manifolds.I have the TCI MII IFS set up and the stock truck engine a/c belt tensioner runs close to the pass side p/s rack tubing. thats the tube I modified. it has a flare fitting but it is a ford rack. the last pic shows it if you can zoom in. the firewall was modified using some 16ga steel and time.
|