[paintman]

Hey thanks for all the help guys!!!! I didn't know that drums require a 1/4" line. If that is in fact true, why would Wilwood sell a prop valve with a 3/16th inlet and outlet ports to the rears. Wouldn't that defeat the purpose of running a 1/4" line? Seems to me your just putting a blockage in the line restricitng the movement of the fluid. Do they sell one specifically for drum/ disc set up with a 1/4" outlet port to the rear?

Also I have been reading that some guys have trouble with thru frame fittings. This is because you are going from a small inlet hole to a large chamber thru the frame back down to a small outlet port to the wheel cylinders. I have found that Art Morrison supposedly makes a special thru frame fitting that eliminates the bleeding problem. what the difference is, I have know idea, except perhaps it has a 3/16 hole all the way thru the bore.

Any thoughts??????