The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 Would you do it?

MARTINSR · 12-13-2018, 07:10 PM

I would do it in a minute, thought about it for sure. When I found my block was cracked in the Rambler I thought a lot about it, checked in on prices and what not.

I have been an electric car fan since the seventies, I used to have a bunch of books on building them from scratch using good old motors bolted to the diff and a bunch of 12 volt batteries. That really is all I would have needed for the Rambler being I just drive it here in town.

But I am damn curious to see if you proceed and look forward to a build thread.

Brian

12-13-2018, 07:10 PM	#4
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Would you do it? I would do it in a minute, thought about it for sure. When I found my block was cracked in the Rambler I thought a lot about it, checked in on prices and what not. I have been an electric car fan since the seventies, I used to have a bunch of books on building them from scratch using good old motors bolted to the diff and a bunch of 12 volt batteries. That really is all I would have needed for the Rambler being I just drive it here in town. But I am damn curious to see if you proceed and look forward to a build thread. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"