Re: 1960 BBC Swap
Quote:
Originally Posted by Captainfab
The way you are installing the engine mount brackets, it really doesn't matter since you will be drilling new holes. When installed in a '63-'72 frame, IIRC the bottom leg goes towards the rear utilizing the factory holes.
|
Thanks, I will be burning them in soon and wanted to make sure I wasn't making a huge mistake.
Quote:
Originally Posted by Captainfab
If the heads on this 402 are the 820 castings, those are actually good flowing heads.
|
They are the 6272292 casting from 72, the math on these comes out to 7.5:1 with the .125" or 5.5cc dome pistons. I have a line on some old bathtub chamber heads that drop the combustion chamber volume by 15cc's and add some quench. I'll be putting some work into them so hopefully they will make some better power...
__________________
Mike
1960 C10 Short Step 235 w/ 3 on the tree
1999 Mazda Miata <- Track Car
2016 Chevrolet Colorado z71
2016 Chevrolet Traverse - Wifes Car
2014 Honda CBR500R <- Also A Dust Collector
2009 Suzuki GSXR600 <- Stolen
|