Re: My 1961 crew cab- XRMYCRU
Here are a couple quick pics, I will have to take some more detailed ones the next time I take it apart.
I just used angle iron to bolt the floor to the bed sides and front bed panel. I spaced the bolts on the side so they either go through the fender, behind the fender, or into the stake pocket.
Underneath there are some factory "U" supports from the 73-87 floor that sit down onto the frame, I did have to move one of them.
The floor sits above the step notch in the frame , and is only raised about 3 inches from stock.
In the back I bent a piece of sheet metal to space between the floor and bed when the tailgate is open.
|