|
Re: Radiator suggestions ?
I just replaced my aluminum/plastic radiator I installed a few years ago this past weekend - I got mine from Advance Auto. Same situation as mentioned above, it started leaking where the tanks meet the core. The previously installed radiator had a drain and was stock height, the replacement has no drain and also is around 1/4-1/2" taller. Same part number so they must have updated the design. It still fit ok after stacking a few washers under the hold downs and was a free replacement.
I have been using the 19" tall radiators. I see they sell a 17" tall as well, but not sure how that would fit in the core support as the hold downs would need to be much lower.
|