Re: pinion angle help please
Quote:
Originally Posted by 88Stanger
So, tonight I was able to make some tranny shims, moving the tranny down angle to 5 degrees, the driveline is now at 2 degrees down and the pinion is at 5 degrees up. What does everyone think of that?
|
From what I have come to understand it should work... although I was thinking you need a working angle of 1-2 degrees. In other words, if the front is down 5 and the pumpkin is up 5 then your working angle is 0 degrees.... they cancel each other out.
The drive test will tell us for sure. Please report back after you run it through it’s paces.
__________________
Brian
1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.
|