[dug224]

Windshield washer now in place. Used a remote fill unit with cap and routed it up under the front right front near my horns. Drilled a hole in the tank top and ran the hose thru it.



In keeping with my minimalist approach, I got my budget Eling all in one gauge setup under way. Need a temp sending unit with a 290 to 24 ohm range and I'll be set. I cut out a new mounting plate that I will paint matte black. Waiting for my LED turn signals and bright light indicator lights to wrap up installation.



Bed closure panel complete except for seam sealer. For now, I decided to seam seal the bed floor rib ends rather than cut, hammer and weld them down.