The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Closing the gap between steering wheel and column

**70shortfleet** · 06-01-2019, 12:13 AM

You could loosen the firewall bracket clamp, drop the column down inside grind the nub off then move the column towards the steering wheel to take up the gap and then make sure the column is vertical and tighten all bolts and then move the spring up to the column in the engine compartment. I think this would work and hope this makes sense to you.

06-01-2019, 12:13 AM	#7
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: Closing the gap between steering wheel and column You could loosen the firewall bracket clamp, drop the column down inside grind the nub off then move the column towards the steering wheel to take up the gap and then make sure the column is vertical and tighten all bolts and then move the spring up to the column in the engine compartment. I think this would work and hope this makes sense to you.