The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vince1 · 06-09-2019, 12:39 PM

I ordered a bunch of parts from Rockauto so it will have a #274 cam .202 dur .390/.409 lift and std rings, brgs and new oil pump and chain set. I don't know much what the cam no's mean so I hope I get my 250HP. In any case it's ordered and that's what's going in. Or if they haven't filled my order should I cancel it? Cancelled, I'll look again. Melling MTC1 ? OR enginetech ECK1014R?

I've degreased, washed and scrubbed the heads so now I'll wire wheel the valves, lap them in with compound, then clean and put them back in with new seals. Final check is to do a solvent check and hope none leak.

06-09-2019, 12:39 PM	#9
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,164	Re: 79 350 overhaul I ordered a bunch of parts from Rockauto so it will have a #274 cam .202 dur .390/.409 lift and std rings, brgs and new oil pump and chain set. I don't know much what the cam no's mean so I hope I get my 250HP. In any case it's ordered and that's what's going in. Or if they haven't filled my order should I cancel it? Cancelled, I'll look again. Melling MTC1 ? OR enginetech ECK1014R? I've degreased, washed and scrubbed the heads so now I'll wire wheel the valves, lap them in with compound, then clean and put them back in with new seals. Final check is to do a solvent check and hope none leak. Last edited by vince1; 06-09-2019 at 01:53 PM.