|
Re: Help me lower my 71 C10
Quote:
Originally Posted by 69gmcc10
article on Cutting springs from a spring mfgr- https://www.eatondetroitspring.com/cutting-coil-springs
POL spindles $240
Super track Bar ECE $130
4" rear springs ECE $114
Total $484
Also, keep in mind that you may run into needing new ball joints if you find out they are shot. (often overlooked) |
Good info 
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|