Re: 292 Questions
Put the float back where the instructions tell you . reset the mixture to 2 turns out , Start the engine and set the fast idle screw (temporarily) to a fast idle with the choke fully open , slowly adjust mixture out until engine begins to stumble then slowly turn back in a 1/4 turn or to when it smooths out . re adjust fast idle screw and that should get you close .
Remember don't rev it too hard 292's don't like that
__________________
1967 Factory short bed - Old school
'71 - 350 / 4bolt / 487 heads / Edelbrock C3BX
Muncie M-22 4 speed / Hurst Comp plus
Factory 12 bolt posi 3.73 / 255-70-15
Smoothed firewall / Factory cowl induction
Power disc brakes / power steering / 3.5-5" drop
|