The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Bushman66 · 06-25-2019, 03:49 PM

I am getting set to convert my 66 C10 over from the 292 to a small block V8 (307 out of a 71 C10...it was free and rebuilt). I have the larger factory 3 row radiator, and the passenger side motor mount perch. The 307 has the pivot ball on the block.

The only pieces I am missing for the V8 are the alternator bracket and the fan. Can these be reused from the 292 on the V8?

06-25-2019, 03:49 PM	#13
Bushman66 Registered User Join Date: Apr 2019 Location: Phx, Arizona Posts: 131	Re: 1966 6 cylinder to v8 swap I am getting set to convert my 66 C10 over from the 292 to a small block V8 (307 out of a 71 C10...it was free and rebuilt). I have the larger factory 3 row radiator, and the passenger side motor mount perch. The 307 has the pivot ball on the block. The only pieces I am missing for the V8 are the alternator bracket and the fan. Can these be reused from the 292 on the V8? Last edited by Bushman66; 06-25-2019 at 04:16 PM.