The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 63 to 66 k10,k20 rear upper shock mounting bolt and hardware picture request.

evan396 · 02-06-2020, 07:14 AM

Hey chris, that's an older 80s 14 bolt ff. Drums and brakes were shot. After pricing out new brake drums and hardware we decided to go with the lugnut 4x4 brake conversion. Those are the stock springs and we had all four reworked at the local spring shop and they are sitting in the stock spring hangers. You can see in the pictures that they still have the factory rivets in them. We are in the process of rebuilding the rockwell t211 transfer case and when we get that done we can install it and get the pinion angle set and weld it all up. The brace helped keep everything lined up and square when we centered the axle.

02-06-2020, 07:14 AM	#5
evan396 Registered User Join Date: Dec 2013 Location: clinton ct Posts: 212	Re: 63 to 66 k10,k20 rear upper shock mounting bolt and hardware picture request. Hey chris, that's an older 80s 14 bolt ff. Drums and brakes were shot. After pricing out new brake drums and hardware we decided to go with the lugnut 4x4 brake conversion. Those are the stock springs and we had all four reworked at the local spring shop and they are sitting in the stock spring hangers. You can see in the pictures that they still have the factory rivets in them. We are in the process of rebuilding the rockwell t211 transfer case and when we get that done we can install it and get the pinion angle set and weld it all up. The brace helped keep everything lined up and square when we centered the axle.