|
Re: How to get cab level?
if you slot the holes that mount the shackles to the frame you should be able to move the bracket up a bit and suck it down tight. the little bit of upward movement of the bracket will possibly fix the issue. you could unbolt it and level the cab, then see how much the holes need to be slotted. could do the cab bracket too bu it bolts to sheet metal so less torque can be added to the bolts. haven's done an AD for a few year so don't remember what holds the cab bracket nut on the inside. if regular style nuts then torquae away, if a stamped steel nut, be careful, maybe just do the frame end.
just an idea, it's all geometry. if you bring the frame bracket closer, the cab MUST raise.
|