Re: 1970 C20 Cummins project RT
Next up is the trans , I am using an NV 4500. I naught a new one from Allstate gear . I opted for the 1 3/8 input . I used a combination of an upgraded nv5600 clutch and a conversion flywheel to get the right offset . The bell going is new from advanced adaptors . It was cheaper than buying a used original . The exhaust is a 4” system for a 2003-2007 dodge , I just didn’t use the extra pipes in the center since my truck is quite a bit shorter . The transfer case is an NP271 Manual shift
|