The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jdb_us1 · 01-13-2021, 04:08 PM

So....

Anyone ever see or hear of someone converting the stock hydraulic clutch slave and master cylinder to a sealed pre bled system?

I have a 1990 crew with an sm465 and hydraulic set up. Replaced the slave, master, and hose with new and have spent HOURS trying to bleed the setup (yes I have tried a power bleeder, traditional pump, hold, and bleed, and depressing the slave with the reservoir cap off). The slave and master are both reman parts.

A came across a setup for an 02 Dodge that looks like it might work with some creative engineering on brackets to get the throw right.

Thoughts?

TIA

01-13-2021, 04:08 PM	#1
jdb_us1 Registered User Join Date: Nov 2016 Location: Bernville PA Posts: 61	sealed hydraulic clutch master and slave So.... Anyone ever see or hear of someone converting the stock hydraulic clutch slave and master cylinder to a sealed pre bled system? I have a 1990 crew with an sm465 and hydraulic set up. Replaced the slave, master, and hose with new and have spent HOURS trying to bleed the setup (yes I have tried a power bleeder, traditional pump, hold, and bleed, and depressing the slave with the reservoir cap off). The slave and master are both reman parts. A came across a setup for an 02 Dodge that looks like it might work with some creative engineering on brackets to get the throw right. Thoughts? TIA __________________ 1990 GMC CC LWB 1958 Chevy 3/4 ton flat bed