|
Re: 3 speed overdrive with an HEI distributor
Be careful with the test wiring as you don't want to forget overdrive is engaged, try to take off in overdrive and risk damaging the transmission. The electronic system as a whole was designed to keep from damaging the overdrive components.
On your test wiring, which wire did you connect to on the solenoid? If the solenoid bench tested properly, it should work when installed in the transmission
__________________
Christian Carpenter
1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit
1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
|