Quote:
Originally Posted by oldman3
Have a question for guys running the LS engine with power steering and a mustang rack&pinion. My old small block I had a Heidt's valve for setting how the power steering felt. With this set-up I installed a new valve in the PS unit, it went from 3gph to 2 gph, which was suppose to make it better. From what little I have driven it, it is to sensitive to me. Is there anything else that can be done to improve this. Thanks Jim
|
Glad you had an easy first drive other than the shifting set back.
I used a Borgeson pressure reducer in mine.
https://www.summitracing.com/parts/b...SABEgJ5IvD_BwE
With this power steering reducer, it contains 5 different shim/washers each one reducing the power.
No Shims 1350PSI
1 Shim 1200PSI
2 Shims 1100PSI
3 Shims 1000PSI
4 Shims 850PSI
5 Shims 700PSI
I'm thinking you could fine tune it to your liking. I forget how many shims I used. Thinking 3 or 4 but its been a minute since I added it. At only $16 bucks and some of your time it might be worth a try.
Marc