Re: Bed assembly/tailgate help needed
I have made several post here about the X method. take a tape and measure a point left to right hen do the opposite right to left and make sure those are on as they should be. you may be able to raise the gate some at the trunions to help you there. On the sides i'd hold in the center and push up on the ends but your gonna need a lot of tools for that that most common at home people dont have. Or maybe your high in the middle that is where your tape is gonna come in handy for you to track it down Like Grump said it is all fixable with a diegrinder and some know how and some money. Good luck. Jim
|