Re: 1969 GMC.. right off the farm
The inner rocker/floor panels were installed high and "in". This was pulling the outer rocker about a quarter inch in towards the center of the cab in the front, even with the door 'tilted' all the way in at the bottom.
Needed to cut up the inner rocker/floor pan to stretch it out that quarter inch and push it down with a new lip for the outer rocker to sit against at the bottom. Outer rocker is finally starting to sit properly with some manipulation. Next step is to get it back in place for final checks and then start cutting apart the drivers side which has the exact same problems.
|