The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Steering Column Conversion - Automatic to Manual, Non-Tilt

MikeandCheryl · 07-08-2022, 12:02 PM

Great article. I'm thinking of going the other way. Taking a manual column and turning it into an automatic shift column (or swapping). Conversely, i could convert my tranny from SM465 to Th350 and just shift it with a floor shift - if this is possible. Surely i don't need a column shifter if the tranny linkage is accessible through the trans cover? Great write up and thanks.

07-08-2022, 12:02 PM	#18
MikeandCheryl Registered User Join Date: Jul 2021 Location: Nanaimo, BC CANADA Posts: 57	Re: Steering Column Conversion - Automatic to Manual, Non-Tilt Great article. I'm thinking of going the other way. Taking a manual column and turning it into an automatic shift column (or swapping). Conversely, i could convert my tranny from SM465 to Th350 and just shift it with a floor shift - if this is possible. Surely i don't need a column shifter if the tranny linkage is accessible through the trans cover? Great write up and thanks.