|
Re: Carb Adjustment
Quote:
Originally Posted by geezer#99
Bump your timing up to 12 degrees. Check your dwell after you do.
That will increase your idle. Turn it back down to minimum. About 500-600 rpm.
Procedure for mixture screw adjustment is set both at 1 and 1/2 turns out from lightly seated. Then adjust for highest vacuum reading. Turn them in first until idle drops. Try to keep them equal. Go small adjustments.
And don’t forget to plug off the vacuum advance when setting timing.
|
Thank you! I'll give this a shot.
__________________
Found Grandpa's old '69 Chevy C-20 - It'll never leave the family again.
"For just a little more, you can do it yourself!"
|