|
Re: Roller Lifter ?
Quote:
Originally Posted by LS short box
In regards to lifters I've reused the stock lifters on my LS swaps. But and it's a big but on my LS swap engines have always been low mileage engines. 25K or less.
Trouble is the LS7 lifters have gotten a bit pricey. I wouldn't run anything else.
If you are going with a cam bigger than stock get better valve springs and lifters.
|
Looking at Trick Flow Cam and Head Combo. It comes with Roller Rockers but no lifters. My LS1 only has ~50,000 original miles. New Cam lift is 585/585 so while not Hugh its up there and matched to the heads. Being Old School I always go with new lifters with new cam. They do offer Stock replacement lifters for under $300
You mentioned LS7 lifters, are they supposed to be better and be used in LS1?.
I don’t mind the $ if it’s worth it
Thanks
__________________
1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN
2013 GMC PU, Oldest Son
71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son
2019 GMC Diesil Dually. Youngest Son
2017 Toyota SUV Daughters car
2018 Traverse , Wife’s Ride
Pittsburg Ca
94565
|