|
Re: 1957 Chevy truck re-rebuild
have you been stuck on the side of the road due to a fuel pump issue? dunno why i would ask, lol.
now that is some forethought, not even really gonna get dirty if the in tank pump fails and you gotta switch. you did forget to bag up a tarp and hang it under there with a rip cord to release it so you have something to lay on if need be, haha.
the underhood pic that show the regulator munting, curious if the reg mount is bolted down in more than a single spot, otherwise vibration may eventually cause a failure that has potential to be catastrophic. once set you could also remove the reg gauge to remove another failure point that could spew fuel all over the hot shiny parts.
|