Re: 1967 Chevy 327 Alternator Setup
Your valve covers look to be the same as the stock covers that were on my 283. I went and measured the height from the flat on the top to the flange at approximately 2-3/8".
Also, a few more photos of the alternator position. My engine has a 6-3/4" crank pulley and not knowing what size is on your 327 suggesting a belt would be difficult. Also, I ran a string along the topside of my upper bracket and it measures approximately 14".
Not sure if any of this helps but hope it does some.
__________________
1967 C10
1980 Jeep CJ5
2020 Toyota 4Runner
2024 Toyota Tundra
|